DOI: https://doi.org/10.32515/2664-262X.2022.5(36).2.186-194
Structural Synthesis of Brake Systems With Technical and Economic Rationale
Ivan Hevko, Professor, Doctor in Technics (Doctor of Technics Sciences), Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, e-mail: gevkoivan1@ukr.net, ORCID ID: 0000-0001-5170-0857
Roman Rohatynsky, Professor, Doctor in Technics (Doctor of Technics Sciences), Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID ID: 0000-0001-8536-4599
Oleg Lyashuk, Professor, Doctor in Technics (Doctor of Technics Sciences), Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, e-mail: oleglashuk@ukr.net, ORCID ID: 0000-0003-4881-8568
Mykhailo Levkovich, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID ID: 0000-0002-6793-8736
Volodymyr Teslia, PhD in Technics (Candidate of Technics Sciences), Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine
Abstract
The purpose of the work is to synthesize the bodies of truck semi-trailers by the method of morphological analysis using hierarchical grouping to obtain structures with improved technical and economic characteristics.
As a result of the synthesis of truck semi-trailer bodies by morphological analysis using hierarchical grouping and advanced engineering solutions for creating structures with improved technical and economic characteristics by analyzing the influence of various factors on design features. The data of the research are based on the stress - strain state (VAT) of the Simulation engineering analysis of the specialized software complex SolidWorks on the CAD model of the body of the truck semi - trailer.
As a result of the conducted research, it was established that the amount of cost savings due to the improvement of the construction of semi-trailer bodies of trucks with standard body dimensions of 2.5×8×1.8 (36 m3) will be approximately UAH 304.5 thousand.
Keywords
synthesis, body, board, structure, stiffener
Full Text:
PDF
References
1. Altshuller, H. S. (1986). Naity ydeiu. Vvedenye v teoryiu reshenyia yzobretatelskykh zadach [Find an idea. Introduction to the theory of inventive problem solving]. Novosybyrsk : Nauka [in Russian].
2. Andreichykov, A.V. (2003). Yntellektualnыi metod synteza tekhnolohycheskykh ynnovatsyi [Intelligent Method for Synthesizing Technological Innovations]. Yzvestyia vuzov. Ser. Mashynostroenye – Izvestiya vuzov. Ser. mechanical engineering . 10, 47-62 [in Russian].
3. Kindratskyi, B.I. (2003). Kontseptsiia i alhorytm bahatokryterialnoho strukturno-parametrychnoho syntezu mashynobudivnykh konstruktsii [Concept and algorithm of rich-criteria structural-parametric synthesis of machine-building structures]. Visnyk TDTU – Bulletin of TDTU, Vol. 8, 1, 73–82 [in Ukrainian].
4. Kuznetsov, Yu.M. & Skliarov, R.A. (2004). Prohnozuvannia rozvytku tekhnichnykh system [Forecasting the development of technical systems]. Yu.M. Kuznetsova (Ed.). Kyiv : TOV «ZMOK». – PP «HNOZIS» [in Ukrainian].
5. Liashuk, O.L., Hevko, I.B., Levkovych, M.H., Vovk, Yu.Ya., Stashkiv, M.Ya. & Kapskyi, D.V. (2021). Doslidzhennia napruzheno-deformovanoho stanu dna kuzova napivprychepa vantazhnoho avtomobilia [Doslіdzhennya stressed-deformed steel bottom of the body napіvprichepa vantage avtomobilya]. Naukovyi visnyk Khersonskoi derzhavnoi morskoi akademii : naukovyi zhurnal – Scientific Bulletin of the Kherson State Maritime Academy : journal of science, 1 (24), 93-103 [in Ukrainian].
6. Odryn, V.M. & Kartavov, S.S. (1977). Morfolohycheskyi analyz system: Postroenye morfolohycheskykh matryts [Morphological analysis of systems: Construction of morphological matrices]. Kyiv : Naukova dumka [in Russian].
7. Polovynkyn, A.Y. (1988). Osnovy inzhenernogo tvorchestva [Fundamentals of engineering creativity] . Moskow : Mashynostroenye [in Russian].
8. Rohatynskyi, R.M., Hevko, I.B. & Diachun, A.Ie. (2014). Naukovo-prykladni osnovy stvorennia hvyntovykh transportno-tekhnolohichnykh mekhanizmiv [Scientific and applied foundations for the creation of screw transport and technological mechanisms]. Ternopil: TNTU imeni Ivana Puliuia [in Ukrainian].
GOST Style Citations
Альтшуллер Г. С. Найти идею. Введение в теорию решения изобретательских задач. Новосибирск : Наука, 1986. 209 с.
Андрейчиков А. В. Интеллектуальный метод синтеза технологических инноваций . Известия вузов. Сер. Машиностроение. 2003. №10. С. 47-62.
Кіндрацький Б. І. Концепція і алгоритм багатокритеріального структурно-параметричного синтезу машинобудівних конструкцій . Вісник ТДТУ. 2003. Т. 8. № 1. С. 73–82.
Кузнецов Ю. М., Скляров Р. А. Прогнозування розвитку технічних систем / під заг. ред. Ю. М. Кузнецова. К. : ТОВ «ЗМОК». ПП «ГНОЗІС», 2004. 323 с.
Ляшук О. Л., Гевко І. Б., Левкович М. Г., Вовк Ю. Я., Сташків М. Я., Капський Д. В. Дослідження напружено-деформованого стану дна кузова напівпричепа вантажного автомобіля. Науковий вісник Херсонської державної морської академії : науковий журнал. 2021. № 1 (24). С 93-103.
Одрин В. М., Картавов С. С. Морфологический анализ систем: Построение морфологических матриц . К. : Наукова думка, 1977.183 с.
Половинкин А. И. Основы инженерного творчества: учеб. пособие для студентов вузов . М. : Машиностроение, 1988. 368 с.
Рогатинський Р.М., Гевко І.Б., Дячун. А.Є. Науково-прикладні основи створення гвинтових транспортно-технологічних механізмів: монографія . Тернопіль: ТНТУ імені Івана Пулюя, 2014. 280 с.
Copyright (c) 2022 Ivan Hevko, Roman Rohatynsky, Oleg Lyashuk, Mykhailo Levkovich,Volodymyr Teslia
Structural Synthesis of Brake Systems With Technical and Economic Rationale
Ivan Hevko, Professor, Doctor in Technics (Doctor of Technics Sciences), Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, e-mail: gevkoivan1@ukr.net, ORCID ID: 0000-0001-5170-0857
Roman Rohatynsky, Professor, Doctor in Technics (Doctor of Technics Sciences), Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID ID: 0000-0001-8536-4599
Oleg Lyashuk, Professor, Doctor in Technics (Doctor of Technics Sciences), Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, e-mail: oleglashuk@ukr.net, ORCID ID: 0000-0003-4881-8568
Mykhailo Levkovich, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID ID: 0000-0002-6793-8736
Volodymyr Teslia, PhD in Technics (Candidate of Technics Sciences), Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine
Abstract
Keywords
Full Text:
PDFReferences
1. Altshuller, H. S. (1986). Naity ydeiu. Vvedenye v teoryiu reshenyia yzobretatelskykh zadach [Find an idea. Introduction to the theory of inventive problem solving]. Novosybyrsk : Nauka [in Russian].
2. Andreichykov, A.V. (2003). Yntellektualnыi metod synteza tekhnolohycheskykh ynnovatsyi [Intelligent Method for Synthesizing Technological Innovations]. Yzvestyia vuzov. Ser. Mashynostroenye – Izvestiya vuzov. Ser. mechanical engineering . 10, 47-62 [in Russian].
3. Kindratskyi, B.I. (2003). Kontseptsiia i alhorytm bahatokryterialnoho strukturno-parametrychnoho syntezu mashynobudivnykh konstruktsii [Concept and algorithm of rich-criteria structural-parametric synthesis of machine-building structures]. Visnyk TDTU – Bulletin of TDTU, Vol. 8, 1, 73–82 [in Ukrainian].
4. Kuznetsov, Yu.M. & Skliarov, R.A. (2004). Prohnozuvannia rozvytku tekhnichnykh system [Forecasting the development of technical systems]. Yu.M. Kuznetsova (Ed.). Kyiv : TOV «ZMOK». – PP «HNOZIS» [in Ukrainian].
5. Liashuk, O.L., Hevko, I.B., Levkovych, M.H., Vovk, Yu.Ya., Stashkiv, M.Ya. & Kapskyi, D.V. (2021). Doslidzhennia napruzheno-deformovanoho stanu dna kuzova napivprychepa vantazhnoho avtomobilia [Doslіdzhennya stressed-deformed steel bottom of the body napіvprichepa vantage avtomobilya]. Naukovyi visnyk Khersonskoi derzhavnoi morskoi akademii : naukovyi zhurnal – Scientific Bulletin of the Kherson State Maritime Academy : journal of science, 1 (24), 93-103 [in Ukrainian].
6. Odryn, V.M. & Kartavov, S.S. (1977). Morfolohycheskyi analyz system: Postroenye morfolohycheskykh matryts [Morphological analysis of systems: Construction of morphological matrices]. Kyiv : Naukova dumka [in Russian].
7. Polovynkyn, A.Y. (1988). Osnovy inzhenernogo tvorchestva [Fundamentals of engineering creativity] . Moskow : Mashynostroenye [in Russian].
8. Rohatynskyi, R.M., Hevko, I.B. & Diachun, A.Ie. (2014). Naukovo-prykladni osnovy stvorennia hvyntovykh transportno-tekhnolohichnykh mekhanizmiv [Scientific and applied foundations for the creation of screw transport and technological mechanisms]. Ternopil: TNTU imeni Ivana Puliuia [in Ukrainian].